Pnt10d150r Compound Ladder (by Steven Masters):

We start off with 3 Pnt10d150r switches as shown below.


Then add the short straights to maintain the 4.985m track spacing.


Finish the first four tracks as shown here.


Add a compound switch combination as seen here. The 0.44m straight is important! It maintains the compound track spacing.




Lets start completing the ladder.


Clean up tracks 1-4.


Complete the ladder with an A4t23_6mStrt.


All done!


Note: Once past track 6 then the ladder is easily extended using the 27.4m straights (1, 2, 4, 6, 8, 10 track sections available).

Pnt3dB Compound Ladder (by Steven Masters):

We start off as shown below.


Then add the 'Frog' section to maintain the 4.985m track spacing.


Finish the first four tracks as shown here.


Add a compound switch combination as seen here.




Lets start completing the ladder.


Tie in tracks 1-4.

All done!

Note: Once past track 6 then the ladder is easily extended using the 44.46m straights (1, 2, 4, 6, 8, 10 track sections available).

Pnt6dB Compound Ladder (by Steven Masters):

We start off as shown below.


Finish the first four tracks as shown here.


Add a compound switch combination as seen here.


Finish the ladder as seen here.


Lets start completing the ladder.


Tie in tracks 1-4.

All done!

Note: Once past track 6 then the ladder is easily extended using the 24.01m straights (1, 2, 4, 6, 8, 10 track sections available).